Basic product parameters:
S2017 level: [Ex (IA)]IICT6 working voltage: 9V maximum output voltage: 11V maximum output current: 180mA
End resistance: 65
AC and DC power supply, AC signal transmission, etc.
Environmental conditions: continuous use temperature -10oC ~ +45oC; storage temperature -40oC ~ +80oC; relative humidity 5-95%RH.
Installation and grounding:
Installation mode: the two installation methods are standard DIN guide rail (35mm) installation and guide bar installation.
DIN guide rail installation, directly connect the safety fence to the DIN guide rail.
The installation of the guide bar needs to drill two installation holes with a distance of 11.5mm and a diameter of 4.5mm on a 20 mm wide copper row, insert and tighten the two grounding bolts of the safety grid, and make the copper row grounded reliably.
The installation diagram is as follows:
The installation location is safety area, no corrosive gas, no strong vibration safety place.
Terminal number: 1,2 non-intrinsically safe terminals (connected to the safety zone); 3,4 intrinsically safe terminals (connected to the dangerous zone); 5,6 grounded terminals.
Terminal 5 and 6 grounding resistance should not be greater than 4 ohm, grounding wire resistance should not be greater than 1 ohm.
When installing, the polarity of the 1,2 terminals should be properly connected, otherwise the safety barrier may be damaged.